Productionprocess

  • Molding

    The continuous flat steel supported by the reel is wound to form a circular mandrel.

  • Feeding

    When the mandrel moves, advanced fillers, glass fibers, resins, and surface materials are measured and placed under the control of program calculation control (PLC) and microcomputer (PC).

  • Curing

    The curing treatment of the product is done by induction heating through a flat steel strip and an infrared device that directly heats the product.The temperature of 20 different parts of the product in the curing area will be measured, and these temperatures will be displayed on the computer screen in the form of images.

  • Cutting and trimming

    Under the pre—determined length setting, the pipe can be cut into a range of 0.3 meters to 18 meters.The cutting chamfering, caliber measurement and the longitudinal movement of the product are coordinated to ensure the vertical cutting and outer diameter elimination of glass fiber reinforced plastic pipes.

  • Online detection

    The pipes that have been cut and ground are delivered to the hydrostatic testing machine for testing through the conveying mechanism.After passing the test, the pipe joints that have been qualified by the hydrostatic test will be delivered together, and the pipe joint installation machine will install the joints.